Igwe na-agbado ọkụ nke gas na-agbado Nbm-250
Nkọwa atụmatụ ngwaahịa
sekit nri waya PWM na-anabata ike nkwụsi ike dị elu, nri waya kwụsiri ike.
Nabata teknụzụ inverter mgbanwe IGBT dị nro, na-akpụ ọmarịcha.
Obere nha, ịdị arọ dị arọ, arụmọrụ dị elu na nchekwa ike, ogologo oge ibu dị elu.
Sekit nchebe zuru oke na ọrụ ngosipụta mmejọ, nchekwa na ntụkwasị obi.
Njikwa loop mechiri emechi, ikike njikwa onwe nke arc siri ike, usoro ịgbado ọkụ kwụsiri ike.
Nhazi dijitalụ zuru oke, njikọta dị elu, ọnụego ọdịda igwe dị ala.
Igwe ọkụ ịgbado ọkụ dị obere na mgbanwe sekit dị mkpụmkpụ yana nso nso n'enweghị mkpasa na ịgbado ọkụ usu.
Nchekwa usoro ịgbado ọkụ na ọrụ oku, nkwalite ngwanrọ nwere ike ịkwado usoro pụrụ iche.
Imepụta ọdịdị mmadụ, mara mma na mmesapụ aka, ọrụ dị mma karịa.
A na-emepụta ihe ndị bụ isi na ihe nchebe atọ, dị mma maka gburugburu ebe dị egwu dị iche iche, ọrụ siri ike na nke a pụrụ ịdabere na ya.
Nkọwapụta ngwaahịa
| Ntinye voltaji M) | 220 |
| Ike ntinye akwadoro (KVA) | 7.9 |
| Voltaji anaghị ebu ibu (M) mmepụta | 65 |
| Oke iwu ugbu a (A) | 30-200 |
| 40°C20% Mbupụta Ogologo oge dị ugbu a (A) | 200 |
| 40°C100% Mbupute Ogologo oge dị ugbu a (A) | 89 |
| net arọ (kg) | 17.5 |
| Akụkụ LxWxH(mm) | 700x335x460 |
| Ihe ndabere | Carbon ígwè, obere alloy ígwè |
| Ọkpụrụkpụ efere (mm) | 0.8-6.0 |
| Dayameta waya (mm) | 0.8-1.0 |
| Ọsọ ndepụta waya kacha (m/min) | 13 |
Ọrụ
Aluminom welders pulsed na-enwekarị atụmatụ na ọrụ ndị a:
Ụdị ịgbado ọkụ nke Pulse: Iji teknụzụ ịgbado ọkụ pulse, site na ịchịkwa ugboro na obosara nke usu dị ugbu a, nwere ike ịchịkwa ntinye ọkụ nke ọma, belata nrụrụ ọkụ.
Njikwa nkwụsi ike Arc: Site na teknụzụ ntụgharị ntụgharị kwụsiri ike, ọ nwere ike inye arc ịgbado ọkụ kwụsiri ike ma zere ịwụ elu na ịgbasa n'oge mgbanwe.
Nchedo gas tupu ịgbado ọkụ: N'oge usoro ịgbado ọkụ, a na-enye nchebe gas kwesịrị ekwesị, dị ka gas inert, iji gbochie ntinye oxygen n'ime weld ma belata ọgbọ nke oxidation.
Aluminom welding waya njikwa pụrụ iche: Maka mkpa ịgbado ọkụ aluminom, nye ndị dabara adaba maka waya ịgbado ọkụ aluminom na njikwa voltaji, iji nweta nsonaazụ ịgbado ọkụ ka mma.
Ọrụ inyeaka ndị ọzọ: Igwe ịgbado ọkụ aluminom pulse nwekwara ike ịnwe ọrụ enyemaka ndị ọzọ, dị ka preheating, preset welding parameters, overheating protection, etc., iji melite ogo na arụmọrụ nke ịgbado ọkụ.
Igwe ịgbado ọkụ aluminom pulsed bụ nke ahaziri maka ịgbado ọkụ aluminom ma ejiri ya mee ihe na ụlọ ọrụ ịgbado ọkụ aluminom.Mgbe ị na-eji igwe ịgbado ọkụ aluminom pulse maka ịgbado ọkụ aluminom, ọ dị mkpa ịhọrọ parampat kwesịrị ekwesị na Ntọala n'ụzọ ziri ezi dịka ihe ndị akọwapụtara na ihe ịgbado ọkụ chọrọ iji hụ na nsonaazụ ịgbado ọkụ dị elu.Na mgbakwunye, onye ọrụ kwesịrị ịma teknụzụ ịgbado ọkụ ziri ezi na nkọwa ọrụ nchekwa iji hụ na nchekwa na mmetụta nke ọrụ ahụ.